Ideal for petrochemical, refining and pipeline valve maintenance needs, EZY-PAK EXTREME and EZY-PAK EXTREME FA (Fiber Added) are enhanced low “E” (low emission) formulated packings using a balance of molybdenum disulfide and surface modified synthetic graphite, plus carbon fibers with EZY-PAK EXTREME FA. This unique combination provides lubrication and enhanced seal energizing properties for a wide variety of temperatures and pressures. Its composition allows the needed flow characteristic into valve stuffing boxes using high pressure injectable guns. EZY-PAK EXTREME and EZY-PAK EXTREME FA assure protection against rust, oxidation, and corrosion, and it will not harden, evaporate, or dry out.
These packings are specially formulated for D&T (Drill & Tap) programs to assist and seal packing materials where fugitive emissions concerns are present. This formulation enhances the performance of braded, die formed or chevron type packing materials. It will help seal once the packing material has failed, leaked or exceeded guaranteed life cycle. EZY-PAK EXTREME and EZY-PAK EXTREME FA’s blend of components helps pack off against back flow of gases and caustic liquids.
– No reportable VOC’s
– Industries’ first low “e” injectable (The requirement to comply with low emission standards
has become one of the most important issues with regard to valves over the past several years.)
*Certified Low-Leaking Valves” shall mean valves for which a manufacturer has issued either: (i) a written guarantee that the valve will not leak above 100 parts per million (ppm) for five years; or (ii) a written guarantee, certification or equivalent documentation that the valve has been tested pursuant to generally-accepted good engineering practices and has been found to be leaking at no greater than 100 ppm.
Benefits
- Low “E” formulation
- No reportable VOC’s
- Rust, oxidation & corrosion protection
- Will not harden, evaporate or dry out
- Easily pumpable
- Wide temperature range
- No shelf life concerns
- Not restricted for air freight shipments
- Well suited for steel, aluminum, stainless steel, cast iron, titanium, copper, brass, alloys, plastic
- Suitable for water valves
- PATENT PENDING
Specifications
-
Base Materials
- Complex & Inorganic / Synthetic PAO & Ester
-
Friction /
Nut-Factor
- (Coefficient of Friction) EZY-PAK EXTREME – 35 ksi 0.12
- (Coefficient of Friction) EZY-PAK EXTREME – 80 ksi 0.125
- (Coefficient of Friction) EZY-PAK EXTREME FA – 35 ksi 0.11
- (Coefficient of Friction) EZY-PAK EXTREME FA – 35 ksi 0.121
-
Service Rating
- -40° F to 750°F
- -40°C to 399°C
Cầu Bình Yên (xác minh chủ tài khoản) –
Good
Trieu Nguyen (xác minh chủ tài khoản) –
Chất lượng tốt
Trieu Nguyen (xác minh chủ tài khoản) –
Giao hàng rất nhanh, đúng lúc đang cần gấp, thank shop
Huyền Trang (xác minh chủ tài khoản) –
Dịch vụ tốt
Thầy Tiên (xác minh chủ tài khoản) –
Dịch vụ tốt
Tiến Quang Nguyễn (xác minh chủ tài khoản) –
Hàng ok
Trang Vu Van (xác minh chủ tài khoản) –
Chất lượng tốt
Thầy Tiên (xác minh chủ tài khoản) –
Good
Vĩnh Kỳ Trần (xác minh chủ tài khoản) –
Anh chủ hỗ trợ rất tốt, cho 5 sao
Phan Nhân (xác minh chủ tài khoản) –
Dịch vụ tốt
Trieu Nguyen (xác minh chủ tài khoản) –
Anh chủ hỗ trợ rất tốt, cho 5 sao
Trang Vu Van (xác minh chủ tài khoản) –
Chất lượng tốt
Vĩnh Kỳ Trần (xác minh chủ tài khoản) –
Dịch vụ tốt
Tuan Pham (xác minh chủ tài khoản) –
Good
Thanh Phan (xác minh chủ tài khoản) –
Good
Trường Nguyễn (xác minh chủ tài khoản) –
Good
Trường Nguyễn (xác minh chủ tài khoản) –
Hàng ok
Trieu Nguyen (xác minh chủ tài khoản) –
Hàng ok
Hồ Nam Anh (xác minh chủ tài khoản) –
Anh chủ hỗ trợ rất tốt, cho 5 sao