Hylomar M (Light, Medium, Heavy) is a highly engineered, non-setting and non-hardening jointing compound. The compound is resistant to a wide range of fluids including:
- Industrial fluids
- Oils
- Petroleum and synthetic diester lubricating oils
- Gasoline and kerosene
- Water/methanol mixture
- Water/glycol and methanol mixtures
- Air
- Turbine and piston engine combustion products
Features
- Non-hardening and non-setting
- Resistant to fuels, oils, coolants and gases
- Specified worldwide by OEM’s
- Wide operating temperatures (- 50°C to +250°C)
- Easy to use
- Unlimited assembly time
- Easy to disassemble components
- For use on metal and plastic close fitting components
- Use as a non-curing thread sealant
- Resists vibration
- Easy to apply to vertical and underside joints due to its thixotropic properties
- Can be used with or without a gasket
Product Sizes
Pack sizes – 40ml tube (blister card), 80ml tube (carton), 200ml aerosol, 200ml Autopress, 250ml brush-top tin, 300ml cartridge and 1 litre tin.
Typical Applications
- Inlet manifolds
- Timing case covers
- Gearboxes and transmission components
- Thread sealing
- Flat Machined Surfaces
- Water and oil pumps
- Instrument inspection covers
- Cylinder head gasket
- Flat rigid sumps
- Gas turbines
- Water cooled generators and turbo vacuum systems
Typical Physical Properties
| Temperature range | -50°C to 250°C (-58°F to 482°F) |
| Light Grade | |
| Film Thickness | 0.015 mm |
| Typical Surface Finish | 2.0 μm |
| Area covered by 80ml | 2.25m² |
| Product coverage after drying | 2mg/cm² |
| MEDIUM GRADE | |
| Film Thickness | 0.03 mm |
| Typical Surface Finish | 3.0 μm |
| Area covered by 80ml | 1.36m² |
| Product coverage after drying | 4mg/cm² |
| HEAVY GRADE | |
| Film Thickness | 0.09 mm |
| Typical Surface Finish | 3.5 μm |
| Area covered by 80ml | 0.67m² |
| Product coverage after drying | 12mg/cm² |
Đánh giá
Chưa có đánh giá nào.